Rocker Type

CamRock – A unique rocker/camber flex pattern defined by evenly balanced tip and tail rocker and camber between the bindings. CamRock improves freestyle finesse by keeping your tips playful while maintaining the power and pop of camber underfoot.

Flex

Twin Flex Pattern

Flex Rating – 7 (1 Soft - 10 Stiff)

Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.

Shape

3D Contour Base 2.0 – Moderate 3D-base contours featuring an even balance of 4mm spoon bevel in the nose and 4mm spoon bevel in the tail. Spoon bevel starts at the rocker point.

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Blunt Nose – 'How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight.' - Jeremy Jones

Core

FSC™ Control Core – Dual density full premium wood core featuring a 2:1 paulownia to poplar stringer ratio that keeps core light but ultra damp.

V-Core – Boards with V-Cores are slightly softer in the very center of the board for improved manouverability and stiffer through the tip and tail for stability and pop.

Laminates

Biax Fiberglass – A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Sidewalls

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Base

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Flip Flop Base – Flip-Flop bases improve board sustainability by reducing p-tex waste.

Edges

Traction Tech 3.0 – Traction Tech 3.0 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside bumps for better grip.

Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Topsheet

Eco-Plastic Topsheet – Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Additional Features

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Binding Compatibility

2 x 4 Insert Pattern

Freeride / Freestyle Pack Inserts – Allows option to center or set back your stance on the sidecut as conditions demand.