Rocker Type
Blended Rocker + 4mm Camber
Flex
Flex Rating – 8 (1 Soft - 10 Stiff)
Shape
Radial Tapered – Inspired by Steve Lis and the revolution that occurred when kneeboards influenced surfboard design. Powder is all about speed and flotation. Displacement of a board’s volume is affected by more than just length. With the 420, Yes. is able to get the stability and float normally associated with much longer boards by punching out the waist width and drastically chopping the length. For example, the 148 has the same circumference and base surface as a traditional 160, but it’s mass is located much closer to your feet resulting in more maneuverability and far less swing weight. A slight taper (12mm) helps keep the nose up without losing the tail’s ability to hold in hard-pack. Stance is only slightly set back from center of effective edge because the difference in nose and tail shovel keeps you from going over the nose.
Core
Poplar / Paulownia
Laminates
Triaxial Glass / Carbon
Base
Sintered True – True Sintered bases are harder and more expensive than extruded, and can be faster for those that ride aggressively.
Binding Compatibility
2 x 4 Inserts
Size (cm) | 148 | 152 |
---|---|---|
Effective Edge (mm) | 1075 | |
Tip Width (mm) | 339.5 | |
Waist Width (mm) | 286 | |
Tail Width (mm) | 321.2 | |
Sidecut Radius (m) | 6.1 | |
Stance Setback (in) | 15 | |
Stance Range (in) | 20.9 - 24.1 | |
Rider Weight (lbs) | 150 - 200 | |
Width | Regular | Regular |
Specs | |
Ability Level- | Advanced-Expert |
Athletes- | David Pitschi |
Binding Mount Pattern- | 2x4 |
Core/Laminates- | Wood |
Flex Rating- | Stiff |
Rocker Type- | Rocker/Camber/Rocker |
Shape- | Directional |
Terrain- | Freeride, Powder |
Warranty- | Limited Lifetime |